info@tuned.dk
0
No products in the cart.

SnowPerformance Boost Cooler Stage 3 EFI ProLine Water Injection

In stock
*** NEW! - ProLine Version *** Award-Winning Water Methanol Injection System - our high-end model for every engine with EFI/manifold fuel injection. The Boost Cooler Stage 3 DI Controller creates a 2D-delivery map based boost and EFI-signal. Easy programmable LCD-display incl. new Dual Stage Injection Technology. Ideal for all turbo-/supercharged engines with traditional EFI/manifold fuel injection (no direct injected engines).

kr.6.800,00 Incl. VAT

Description

HORSEPOWER OF YOUR CAR

Select the current horsepower-level of your car.

Depending on the performance of your turbo / supercharged engine, we choose the right Boost Cooler nozzles. For all engines with two separate intakes (e.g. V-engine), 2 Boost Cooler nozzles must be installed (1 for each inlet).

Straight Engines
Straight Engine/1 nozzle up to 100hp (+0.00 EUR)
Straight Engine/1 nozzle 101 – 200hp (+0.00 EUR)
Straight Engine/1 nozzle 201 – 300hp (+0.00 EUR)
Straight Engine/1 nozzle 301 – 400hp (+0.00 EUR)
Straight Engine/1 nozzle 401 – 950hp (+0.00 EUR)

V-Engines

V-engine /2nozzles 250 – 300hp (+199.00 EUR)
V-engine /2nozzles 301 – 450hp (+199.00 EUR)
V-engine /2nozzles 451 – 700hp (+199.00 EUR)
V-engine /2nozzles 651 – 850hp (+199.00 EUR)
V-engine /2nozzles 801 – 900hp (+199.00 EUR)

BOOST COOLER RESERVOIR SIZE

Select the desired size of your Boost Cooler fluid tank.

A 3l tank is included in every Boost Cooler system. For more comfort and range, we recommend upgrading to the 9.5l or 26.5l tank installation set.

3l reservoir (Standart) (+0.00 EUR)
Upgrade – 9.5l trunk mounting kit (+150 EUR)
Upgrade 9.5 Race trunk mounting kit (+375 EUR)
Upgrade – 26.5l trunk mounting kit (+194 EUR)

Features

  • Boost / fuel controlled, variable injection
  • Dual Stage Technology
  • ProLine Version: High-Quality Stainless Steel Flex Lines and Connection Technology
  • Efficient Intercooling, up to 60°C lower air intake temperature
  • Achieve approx. 116-Octan rating, by using ordinary 95-Octan gasoline
  • Reduces EGT and oil temperatures
  • Allows you to run safely more boost and/or more timing
  • Reduces thermical stress on NOS, LPG/Autogas and pre-tuned engines like chiptuning & higher boost levels
  • No wear issues, only clean combustion chambers
  • No loss of boost as with an intercooler
  • Reduces the specific fuel consumption
  • Easy installation
  • Optimal Cooling with Water Injection

Obtain up to 10-25% more power in your turbo- or supercharged engine, even if it´s pre-tuned, by using the Boost Cooler™-Water/Methanol Injection System!

The main function of the Boost Cooler is to suppress detonation caused by high temperature and pressure developed within the combustion chamber when the effective compression ratio has been taken beyond the auto-ignition point by either a turbo or a supercharger. Water, with its high latent heat content, is extremely effective for controlling not only the onset of detonation but also the production of oxides of nitrogen in the modern leanburn engines.

Furthermore, the Boost Cooler doesn’t create an intake restriction like an intercooler, and unlike race gas, it reduces intake air temps up to 60°C and improves charge air density too.

Snow Performance systems effectively steam clean the valves, valve seats, and even the piston tops and intake when they inject. This reduces carbon build up. The Boost Cooler™ can be installed in a matter of hours without having to remove bumpers or do custom intake piping.

More Power by Boost Cooler

With the Boost Cooler, you can achieve up to 10% extra power for suction engines. The optimal cooling compensates for power losses at higher outside temperatures. In addition, deposits in the combustion chamber and intake manifold are reduced.

116 Octane Race Gas Performance

Water or water/methanol is injected into the intake air using the patented high-pressure pump. The evaporation mist achieves extremely effective intake air and intercooling, whereby, among other things, an uncontrolled combustion (“knocking”) is prevented. The effect is demonstrably comparable with 116 octane racing gasoline.

Additional Information

Engine

Petrol

Make

Universal parts

Model

Snow Performance

Part Number

SP10315PRO

Year

All Years

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.